Manufacturing technique Tradename Composition (%)
Cast1 Wirobond 280® (W280) Co = 60.2; Cr = 25; Mo = 4.8; W = 6.2; Ga = 2.8; Si < 1; Mn < 1
Cast1 Remanium® Star (Rc) Co = 60.5; Cr = 28; Si = 1.5; W = 9; Mn < 1; N < 1; Nb < 1
Milled2 Remanium® Star MDII (Rm) -
Laser melted3 Remanium® Star CL (Rlm) -
Presintered milled4 Zirkonzahn® Sintermetall (Zz) Co = 62 to 68; Cr = 26 to 30; Mo = 5 to 7; N < 0.5; C < 0.5
Cold drawn CpTi4 C < 0.01; N < 1; O = 0.33; Fe = 0.08; H = 0.01; Ti balance
Drawn, annealed Ti-6Al-4V ELI Al = 5.96 to 6.05; V = 4.11 to 4.02; Fe = 0.14 to 0.17; C = 0.008 to 0.009; N = 0.004 to 0.005; O = 0 to 0.12; H = 0 to 0.0018; Ti balance

1The cast specimens; W280 and Rc were cast by an experienced dental technician at the Dental Laboratory Technology in the Institute of Odontology, University of Gothenburg, Sahlgrenska Academy, Sweden, according to the manufacturer´s recommendation.
2Processed by Kullberg Mikroteknik, Lycke, Sweden.
3Received prepared from the manufacturer.
4Final sintering at Säffle Dental AB, Säffle, Sweden. Processed by Kullberg Mikroteknik, Lycke, Sweden.
ELI = extra-low interstitial.